diff --git a/doc/source/deploy/csi.rst b/doc/source/deploy/csi.rst
index fc89945..7fbb398 100644
--- a/doc/source/deploy/csi.rst
+++ b/doc/source/deploy/csi.rst
@@ -40,6 +40,34 @@
 can either be Fibre Channel (FC) or iSCSI, depending on your network
 infrastructure.
 
+*********
+IBM Block
+*********
+
+If you're using a storage array that is compatible with the IBM Block CSI
+driver, you can configure it by updating your Ansible inventory as follows:
+
+.. code-block:: yaml
+
+    csi_driver: ibm_block
+    ibm_block_csi_driver_management_address: <FILL IN>
+    ibm_block_csi_driver_username: <FILL IN>
+    ibm_block_csi_driver_password: <FILL IN>
+    ibm_block_csi_driver_pool: <FILL IN>
+    ibm_block_csi_driver_io_group: <FILL IN>
+
+Optionally, you can control the ``SpaceEfficiency`` setting which defaults to
+`thin` to enable thin provisioning.  To change it to any other value, you
+can set the following variable:
+
+.. code-block:: yaml
+
+    ibm_block_csi_driver_space_efficiency: <FILL IN>
+
+Ensure that you replace ``<FILL IN>`` with actual values relevant to your IBM
+Block configuration.  You can use the `Creating a StorageClass <https://www.ibm.com/docs/en/stg-block-csi-driver/1.11.3?topic=configuring-creating-storageclass>`_
+documentation to help you determine the values to use.
+
 ********
 StorPool
 ********
diff --git a/roles/csi/meta/main.yml b/roles/csi/meta/main.yml
index 58e6c8b..8c37342 100644
--- a/roles/csi/meta/main.yml
+++ b/roles/csi/meta/main.yml
@@ -38,3 +38,5 @@
     when: csi_driver == "powerstore"
   - role: storpool_csi
     when: csi_driver == "storpool"
+  - role: ibm_block_csi_driver
+    when: csi_driver == "ibm-block"
diff --git a/roles/defaults/vars/main.yml b/roles/defaults/vars/main.yml
index d04cb7a..c387f8b 100644
--- a/roles/defaults/vars/main.yml
+++ b/roles/defaults/vars/main.yml
@@ -72,6 +72,17 @@
   heat_purge_deleted: "registry.atmosphere.dev/library/heat:{{ atmosphere_release }}"
   horizon_db_sync: "registry.atmosphere.dev/library/horizon:{{ atmosphere_release }}"
   horizon: "registry.atmosphere.dev/library/horizon:{{ atmosphere_release }}"
+  ibm_block_csi_addons_replicator: quay.io/ibmcsiblock/csi-block-volumereplication-operator:v0.9.0
+  ibm_block_csi_attacher: registry.k8s.io/sig-storage/csi-attacher:v4.2.0
+  ibm_block_csi_driver_controller: quay.io/ibmcsiblock/ibm-block-csi-driver-controller:1.11.2
+  ibm_block_csi_driver_node: quay.io/ibmcsiblock/ibm-block-csi-driver-node:1.11.2
+  ibm_block_csi_node_driver_registrar: registry.k8s.io/sig-storage/csi-node-driver-registrar:v2.6.3
+  ibm_block_csi_livenessprobe: registry.k8s.io/sig-storage/livenessprobe:v2.9.0
+  ibm_block_csi_operator: quay.io/ibmcsiblock/ibm-block-csi-operator:1.11.2
+  ibm_block_csi_provisioner: registry.k8s.io/sig-storage/csi-provisioner:v3.4.0
+  ibm_block_csi_resizer: registry.k8s.io/sig-storage/csi-resizer:v1.7.0
+  ibm_block_csi_snapshotter: registry.k8s.io/sig-storage/csi-snapshotter:v6.2.1
+  ibm_block_csi_volume_group: quay.io/ibmcsiblock/csi-volume-group-operator:v0.9.1
   ingress_nginx_controller: registry.k8s.io/ingress-nginx/controller:v1.1.1
   ingress_nginx_default_backend: registry.k8s.io/defaultbackend-amd64:1.5
   ingress_nginx_kube_webhook_certgen: registry.k8s.io/ingress-nginx/kube-webhook-certgen:v1.1.1
diff --git a/roles/ibm_block_csi_driver/README.md b/roles/ibm_block_csi_driver/README.md
new file mode 100644
index 0000000..bda6a7d
--- /dev/null
+++ b/roles/ibm_block_csi_driver/README.md
@@ -0,0 +1 @@
+# `ibm_block_csi_driver`
diff --git a/roles/ibm_block_csi_driver/defaults/main.yml b/roles/ibm_block_csi_driver/defaults/main.yml
new file mode 100644
index 0000000..62360ce
--- /dev/null
+++ b/roles/ibm_block_csi_driver/defaults/main.yml
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: Apache-2.0
+
+ibm_block_csi_driver_space_efficiency: thin
+# ibm_block_csi_driver_io_group:
diff --git a/roles/ibm_block_csi_driver/meta/main.yml b/roles/ibm_block_csi_driver/meta/main.yml
new file mode 100644
index 0000000..c71c996
--- /dev/null
+++ b/roles/ibm_block_csi_driver/meta/main.yml
@@ -0,0 +1,32 @@
+# Copyright (c) 2024 VEXXHOST, Inc.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+galaxy_info:
+  author: VEXXHOST, Inc.
+  description: Ansible role for IBM Block CSI Driver
+  license: Apache-2.0
+  min_ansible_version: 5.5.0
+  standalone: false
+  platforms:
+    - name: EL
+      versions:
+        - "8"
+        - "9"
+    - name: Ubuntu
+      versions:
+        - focal
+        - jammy
+
+dependencies:
+  - role: defaults
diff --git a/roles/ibm_block_csi_driver/tasks/main.yml b/roles/ibm_block_csi_driver/tasks/main.yml
new file mode 100644
index 0000000..f80f38d
--- /dev/null
+++ b/roles/ibm_block_csi_driver/tasks/main.yml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: Apache-2.0
+
+- name: Deploy CSI
+  kubernetes.core.k8s:
+    state: present
+    template:
+      - path: ibm-block-csi-operator.yaml.j2
+      - path: csi.ibm.com_v1_ibmblockcsi_cr.yaml.j2
+
+- name: Create Secret
+  kubernetes.core.k8s:
+    state: present
+    definition:
+      apiVersion: v1
+      kind: Secret
+      metadata:
+        name: ibm-block-csi-credentials
+        namespace: kube-system
+      type: Opaque
+      stringData:
+        management_address: "{{ ibm_block_csi_driver_management_address }}"
+        username: "{{ ibm_block_csi_driver_username }}"
+        password: "{{ ibm_block_csi_driver_password }}"
+
+- name: Create StorageClass
+  kubernetes.core.k8s:
+    state: present
+    definition:
+      kind: StorageClass
+      apiVersion: storage.k8s.io/v1
+      metadata:
+        name: general
+        annotations:
+          storageclass.kubernetes.io/is-default-class: "true"
+      provisioner: block.csi.ibm.com
+      allowVolumeExpansion: true
+      parameters:
+        pool: "{{ ibm_block_csi_driver_pool }}"
+        io_group: "{{ ibm_block_csi_driver_io_group }}"
+        SpaceEfficiency: "{{ ibm_block_csi_driver_space_efficiency }}"
+        csi.storage.k8s.io/secret-name: ibm-block-csi-credentials
+        csi.storage.k8s.io/secret-namespace: kube-system
diff --git a/roles/ibm_block_csi_driver/templates/csi.ibm.com_v1_ibmblockcsi_cr.yaml.j2 b/roles/ibm_block_csi_driver/templates/csi.ibm.com_v1_ibmblockcsi_cr.yaml.j2
new file mode 100644
index 0000000..0c012e4
--- /dev/null
+++ b/roles/ibm_block_csi_driver/templates/csi.ibm.com_v1_ibmblockcsi_cr.yaml.j2
@@ -0,0 +1,89 @@
+apiVersion: csi.ibm.com/v1
+kind: IBMBlockCSI
+metadata:
+  name: ibm-block-csi
+  namespace: kube-system
+  labels:
+    app.kubernetes.io/name: ibm-block-csi
+    app.kubernetes.io/instance: ibm-block-csi
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    release: v1.11.3
+spec:
+  # controller is a statefulSet with ibm-block-csi-controller container
+  # and csi-provisioner, csi-attacher, csi-snapshotter and livenessprobe sidecars.
+  controller:
+    repository: "{{ atmosphere_images['ibm_block_csi_driver_controller'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_driver_controller'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+    affinity:
+      nodeAffinity:
+        requiredDuringSchedulingIgnoredDuringExecution:
+          nodeSelectorTerms:
+            - matchExpressions:
+                - key: kubernetes.io/arch
+                  operator: In
+                  values:
+                    - amd64
+                    - s390x
+                    - ppc64le
+
+  # node is a daemonSet with ibm-block-csi-node container
+  # and csi-node-driver-registrar and livenessprobe sidecars.
+  node:
+    repository: "{{ atmosphere_images['ibm_block_csi_driver_node'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_driver_node'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+    affinity:
+      nodeAffinity:
+        requiredDuringSchedulingIgnoredDuringExecution:
+          nodeSelectorTerms:
+            - matchExpressions:
+                - key: kubernetes.io/arch
+                  operator: In
+                  values:
+                    - amd64
+                    - s390x
+                    - ppc64le
+
+#    tolerations:
+#    - effect: NoSchedule
+#      key: node-role.kubernetes.io/master
+#      operator: Exists
+
+  sidecars:
+  - name: csi-node-driver-registrar
+    repository: "{{ atmosphere_images['ibm_block_csi_node_driver_registrar'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_node_driver_registrar'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-provisioner
+    repository: "{{ atmosphere_images['ibm_block_csi_provisioner'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_provisioner'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-attacher
+    repository: "{{ atmosphere_images['ibm_block_csi_attacher'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_attacher'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-snapshotter
+    repository: "{{ atmosphere_images['ibm_block_csi_snapshotter'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_snapshotter'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-resizer
+    repository: "{{ atmosphere_images['ibm_block_csi_resizer'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_resizer'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-addons-replicator
+    repository: "{{ atmosphere_images['ibm_block_csi_addons_replicator'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_addons_replicator'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: csi-volume-group
+    repository: "{{ atmosphere_images['ibm_block_csi_volume_group'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_volume_group'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+  - name: livenessprobe
+    repository: "{{ atmosphere_images['ibm_block_csi_livenessprobe'] | vexxhost.kubernetes.docker_image('name') }}"
+    tag: "{{ atmosphere_images['ibm_block_csi_livenessprobe'] | vexxhost.kubernetes.docker_image('tag') }}"
+    imagePullPolicy: IfNotPresent
+
+#  healthPort: 9808
+#  imagePullSecrets:
+#  - "secretName"
diff --git a/roles/ibm_block_csi_driver/templates/ibm-block-csi-operator.yaml.j2 b/roles/ibm_block_csi_driver/templates/ibm-block-csi-operator.yaml.j2
new file mode 100644
index 0000000..22d2942
--- /dev/null
+++ b/roles/ibm_block_csi_driver/templates/ibm-block-csi-operator.yaml.j2
@@ -0,0 +1,3447 @@
+apiVersion: apiextensions.k8s.io/v1
+kind: CustomResourceDefinition
+metadata:
+  annotations:
+    controller-gen.kubebuilder.io/version: v0.10.0
+  creationTimestamp: null
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+    release: v1.11.3
+  name: hostdefiners.csi.ibm.com
+spec:
+  group: csi.ibm.com
+  names:
+    kind: HostDefiner
+    listKind: HostDefinerList
+    plural: hostdefiners
+    singular: hostdefiner
+  scope: Namespaced
+  versions:
+  - name: v1
+    schema:
+      openAPIV3Schema:
+        description: HostDefiner is the Schema for the hostdefiners API
+        properties:
+          apiVersion:
+            description: 'APIVersion defines the versioned schema of this representation
+              of an object. Servers should convert recognized schemas to the latest
+              internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
+            type: string
+          kind:
+            description: 'Kind is a string value representing the REST resource this
+              object represents. Servers may infer this from the endpoint the client
+              submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
+            type: string
+          metadata:
+            type: object
+          spec:
+            description: HostDefinerSpec defines the desired state of HostDefiner
+            properties:
+              hostDefiner:
+                description: IBMBlockHostDefinerSpec defines the observed state of
+                  HostDefiner
+                properties:
+                  affinity:
+                    description: Affinity is a group of affinity scheduling rules.
+                    properties:
+                      nodeAffinity:
+                        description: Describes node affinity scheduling rules for
+                          the pod.
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node matches the corresponding matchExpressions;
+                              the node(s) with the highest sum are the most preferred.
+                            items:
+                              description: An empty preferred scheduling term matches
+                                all objects with implicit weight 0 (i.e. it's a no-op).
+                                A null preferred scheduling term matches no objects
+                                (i.e. is also a no-op).
+                              properties:
+                                preference:
+                                  description: A node selector term, associated with
+                                    the corresponding weight.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                weight:
+                                  description: Weight associated with matching the
+                                    corresponding nodeSelectorTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - preference
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to an update), the system
+                              may or may not try to eventually evict the pod from
+                              its node.
+                            properties:
+                              nodeSelectorTerms:
+                                description: Required. A list of node selector terms.
+                                  The terms are ORed.
+                                items:
+                                  description: A null or empty node selector term
+                                    matches no objects. The requirements of them are
+                                    ANDed. The TopologySelectorTerm type implements
+                                    a subset of the NodeSelectorTerm.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                type: array
+                            required:
+                            - nodeSelectorTerms
+                            type: object
+                            x-kubernetes-map-type: atomic
+                        type: object
+                      podAffinity:
+                        description: Describes pod affinity scheduling rules (e.g.
+                          co-locate this pod in the same node, zone, etc. as some
+                          other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to a pod label update),
+                              the system may or may not try to eventually evict the
+                              pod from its node. When there are multiple elements,
+                              the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                      podAntiAffinity:
+                        description: Describes pod anti-affinity scheduling rules
+                          (e.g. avoid putting this pod in the same node, zone, etc.
+                          as some other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the anti-affinity expressions
+                              specified by this field, but it may choose a node that
+                              violates one or more of the expressions. The node that
+                              is most preferred is the one with the greatest sum of
+                              weights, i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              anti-affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the anti-affinity requirements specified
+                              by this field are not met at scheduling time, the pod
+                              will not be scheduled onto the node. If the anti-affinity
+                              requirements specified by this field cease to be met
+                              at some point during pod execution (e.g. due to a pod
+                              label update), the system may or may not try to eventually
+                              evict the pod from its node. When there are multiple
+                              elements, the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                    type: object
+                  allowDelete:
+                    default: true
+                    type: boolean
+                  connectivityType:
+                    type: string
+                  dynamicNodeLabeling:
+                    default: false
+                    type: boolean
+                  imagePullPolicy:
+                    description: PullPolicy describes a policy for if/when to pull
+                      a container image
+                    type: string
+                  prefix:
+                    type: string
+                  repository:
+                    type: string
+                  tag:
+                    type: string
+                  tolerations:
+                    items:
+                      description: The pod this Toleration is attached to tolerates
+                        any taint that matches the triple <key,value,effect> using
+                        the matching operator <operator>.
+                      properties:
+                        effect:
+                          description: Effect indicates the taint effect to match.
+                            Empty means match all taint effects. When specified, allowed
+                            values are NoSchedule, PreferNoSchedule and NoExecute.
+                          type: string
+                        key:
+                          description: Key is the taint key that the toleration applies
+                            to. Empty means match all taint keys. If the key is empty,
+                            operator must be Exists; this combination means to match
+                            all values and all keys.
+                          type: string
+                        operator:
+                          description: Operator represents a key's relationship to
+                            the value. Valid operators are Exists and Equal. Defaults
+                            to Equal. Exists is equivalent to wildcard for value,
+                            so that a pod can tolerate all taints of a particular
+                            category.
+                          type: string
+                        tolerationSeconds:
+                          description: TolerationSeconds represents the period of
+                            time the toleration (which must be of effect NoExecute,
+                            otherwise this field is ignored) tolerates the taint.
+                            By default, it is not set, which means tolerate the taint
+                            forever (do not evict). Zero and negative values will
+                            be treated as 0 (evict immediately) by the system.
+                          format: int64
+                          type: integer
+                        value:
+                          description: Value is the taint value the toleration matches
+                            to. If the operator is Exists, the value should be empty,
+                            otherwise just a regular string.
+                          type: string
+                      type: object
+                    type: array
+                required:
+                - repository
+                - tag
+                type: object
+              imagePullSecrets:
+                items:
+                  type: string
+                type: array
+            required:
+            - hostDefiner
+            type: object
+          status:
+            description: HostDefinerStatus defines the observed state of HostDefiner
+            properties:
+              hostDefinerReady:
+                type: boolean
+              phase:
+                type: string
+              version:
+                description: Version is the current driver version
+                type: string
+            required:
+            - hostDefinerReady
+            - phase
+            - version
+            type: object
+        type: object
+    served: true
+    storage: true
+    subresources:
+      status: {}
+---
+apiVersion: apiextensions.k8s.io/v1
+kind: CustomResourceDefinition
+metadata:
+  annotations:
+    controller-gen.kubebuilder.io/version: v0.10.0
+  creationTimestamp: null
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+    release: v1.11.3
+  name: hostdefinitions.csi.ibm.com
+spec:
+  group: csi.ibm.com
+  names:
+    kind: HostDefinition
+    listKind: HostDefinitionList
+    plural: hostdefinitions
+    singular: hostdefinition
+  scope: Cluster
+  versions:
+  - additionalPrinterColumns:
+    - jsonPath: .metadata.creationTimestamp
+      name: Age
+      type: date
+    - jsonPath: .status.phase
+      name: Phase
+      type: string
+    - jsonPath: .spec.hostDefinition.nodeName
+      name: Node
+      type: string
+    - jsonPath: .spec.hostDefinition.managementAddress
+      name: Management_Address
+      type: string
+    name: v1
+    schema:
+      openAPIV3Schema:
+        description: HostDefinition is the Schema for the hostdefinitions API
+        properties:
+          apiVersion:
+            description: 'APIVersion defines the versioned schema of this representation
+              of an object. Servers should convert recognized schemas to the latest
+              internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
+            type: string
+          kind:
+            description: 'Kind is a string value representing the REST resource this
+              object represents. Servers may infer this from the endpoint the client
+              submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
+            type: string
+          metadata:
+            type: object
+          spec:
+            description: HostDefinitionSpec defines the desired state of HostDefinition
+            properties:
+              hostDefinition:
+                description: Definition defines the observed state of HostDefinition
+                properties:
+                  connectivityType:
+                    type: string
+                  ioGroups:
+                    items:
+                      type: integer
+                    type: array
+                  managementAddress:
+                    type: string
+                  nodeId:
+                    type: string
+                  nodeName:
+                    type: string
+                  nodeNameOnStorage:
+                    type: string
+                  ports:
+                    items:
+                      type: string
+                    type: array
+                  secretName:
+                    type: string
+                  secretNamespace:
+                    type: string
+                required:
+                - managementAddress
+                - nodeName
+                type: object
+            required:
+            - hostDefinition
+            type: object
+          status:
+            description: HostDefinitionStatus defines the status of the host definition
+              on the storage
+            properties:
+              phase:
+                type: string
+            required:
+            - phase
+            type: object
+        type: object
+    served: true
+    storage: true
+    subresources:
+      status: {}
+---
+apiVersion: apiextensions.k8s.io/v1
+kind: CustomResourceDefinition
+metadata:
+  annotations:
+    controller-gen.kubebuilder.io/version: v0.10.0
+  creationTimestamp: null
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+    release: v1.11.3
+  name: ibmblockcsis.csi.ibm.com
+spec:
+  group: csi.ibm.com
+  names:
+    kind: IBMBlockCSI
+    listKind: IBMBlockCSIList
+    plural: ibmblockcsis
+    shortNames:
+    - ibc
+    singular: ibmblockcsi
+  scope: Namespaced
+  versions:
+  - name: v1
+    schema:
+      openAPIV3Schema:
+        description: IBMBlockCSI is the Schema for the ibmblockcsis API
+        properties:
+          apiVersion:
+            description: 'APIVersion defines the versioned schema of this representation
+              of an object. Servers should convert recognized schemas to the latest
+              internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources'
+            type: string
+          kind:
+            description: 'Kind is a string value representing the REST resource this
+              object represents. Servers may infer this from the endpoint the client
+              submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds'
+            type: string
+          metadata:
+            type: object
+          spec:
+            description: IBMBlockCSISpec defines the desired state of IBMBlockCSI
+            properties:
+              controller:
+                description: IBMBlockCSIControllerSpec defines the desired state of
+                  IBMBlockCSIController
+                properties:
+                  affinity:
+                    description: Affinity is a group of affinity scheduling rules.
+                    properties:
+                      nodeAffinity:
+                        description: Describes node affinity scheduling rules for
+                          the pod.
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node matches the corresponding matchExpressions;
+                              the node(s) with the highest sum are the most preferred.
+                            items:
+                              description: An empty preferred scheduling term matches
+                                all objects with implicit weight 0 (i.e. it's a no-op).
+                                A null preferred scheduling term matches no objects
+                                (i.e. is also a no-op).
+                              properties:
+                                preference:
+                                  description: A node selector term, associated with
+                                    the corresponding weight.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                weight:
+                                  description: Weight associated with matching the
+                                    corresponding nodeSelectorTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - preference
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to an update), the system
+                              may or may not try to eventually evict the pod from
+                              its node.
+                            properties:
+                              nodeSelectorTerms:
+                                description: Required. A list of node selector terms.
+                                  The terms are ORed.
+                                items:
+                                  description: A null or empty node selector term
+                                    matches no objects. The requirements of them are
+                                    ANDed. The TopologySelectorTerm type implements
+                                    a subset of the NodeSelectorTerm.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                type: array
+                            required:
+                            - nodeSelectorTerms
+                            type: object
+                            x-kubernetes-map-type: atomic
+                        type: object
+                      podAffinity:
+                        description: Describes pod affinity scheduling rules (e.g.
+                          co-locate this pod in the same node, zone, etc. as some
+                          other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to a pod label update),
+                              the system may or may not try to eventually evict the
+                              pod from its node. When there are multiple elements,
+                              the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                      podAntiAffinity:
+                        description: Describes pod anti-affinity scheduling rules
+                          (e.g. avoid putting this pod in the same node, zone, etc.
+                          as some other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the anti-affinity expressions
+                              specified by this field, but it may choose a node that
+                              violates one or more of the expressions. The node that
+                              is most preferred is the one with the greatest sum of
+                              weights, i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              anti-affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the anti-affinity requirements specified
+                              by this field are not met at scheduling time, the pod
+                              will not be scheduled onto the node. If the anti-affinity
+                              requirements specified by this field cease to be met
+                              at some point during pod execution (e.g. due to a pod
+                              label update), the system may or may not try to eventually
+                              evict the pod from its node. When there are multiple
+                              elements, the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                    type: object
+                  imagePullPolicy:
+                    description: PullPolicy describes a policy for if/when to pull
+                      a container image
+                    type: string
+                  repository:
+                    type: string
+                  tag:
+                    type: string
+                  tolerations:
+                    items:
+                      description: The pod this Toleration is attached to tolerates
+                        any taint that matches the triple <key,value,effect> using
+                        the matching operator <operator>.
+                      properties:
+                        effect:
+                          description: Effect indicates the taint effect to match.
+                            Empty means match all taint effects. When specified, allowed
+                            values are NoSchedule, PreferNoSchedule and NoExecute.
+                          type: string
+                        key:
+                          description: Key is the taint key that the toleration applies
+                            to. Empty means match all taint keys. If the key is empty,
+                            operator must be Exists; this combination means to match
+                            all values and all keys.
+                          type: string
+                        operator:
+                          description: Operator represents a key's relationship to
+                            the value. Valid operators are Exists and Equal. Defaults
+                            to Equal. Exists is equivalent to wildcard for value,
+                            so that a pod can tolerate all taints of a particular
+                            category.
+                          type: string
+                        tolerationSeconds:
+                          description: TolerationSeconds represents the period of
+                            time the toleration (which must be of effect NoExecute,
+                            otherwise this field is ignored) tolerates the taint.
+                            By default, it is not set, which means tolerate the taint
+                            forever (do not evict). Zero and negative values will
+                            be treated as 0 (evict immediately) by the system.
+                          format: int64
+                          type: integer
+                        value:
+                          description: Value is the taint value the toleration matches
+                            to. If the operator is Exists, the value should be empty,
+                            otherwise just a regular string.
+                          type: string
+                      type: object
+                    type: array
+                required:
+                - repository
+                - tag
+                type: object
+              healthPort:
+                type: integer
+              imagePullSecrets:
+                items:
+                  type: string
+                type: array
+              node:
+                description: IBMBlockCSINodeSpec defines the desired state of IBMBlockCSINode
+                properties:
+                  affinity:
+                    description: Affinity is a group of affinity scheduling rules.
+                    properties:
+                      nodeAffinity:
+                        description: Describes node affinity scheduling rules for
+                          the pod.
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node matches the corresponding matchExpressions;
+                              the node(s) with the highest sum are the most preferred.
+                            items:
+                              description: An empty preferred scheduling term matches
+                                all objects with implicit weight 0 (i.e. it's a no-op).
+                                A null preferred scheduling term matches no objects
+                                (i.e. is also a no-op).
+                              properties:
+                                preference:
+                                  description: A node selector term, associated with
+                                    the corresponding weight.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                weight:
+                                  description: Weight associated with matching the
+                                    corresponding nodeSelectorTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - preference
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to an update), the system
+                              may or may not try to eventually evict the pod from
+                              its node.
+                            properties:
+                              nodeSelectorTerms:
+                                description: Required. A list of node selector terms.
+                                  The terms are ORed.
+                                items:
+                                  description: A null or empty node selector term
+                                    matches no objects. The requirements of them are
+                                    ANDed. The TopologySelectorTerm type implements
+                                    a subset of the NodeSelectorTerm.
+                                  properties:
+                                    matchExpressions:
+                                      description: A list of node selector requirements
+                                        by node's labels.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchFields:
+                                      description: A list of node selector requirements
+                                        by node's fields.
+                                      items:
+                                        description: A node selector requirement is
+                                          a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: The label key that the selector
+                                              applies to.
+                                            type: string
+                                          operator:
+                                            description: Represents a key's relationship
+                                              to a set of values. Valid operators
+                                              are In, NotIn, Exists, DoesNotExist.
+                                              Gt, and Lt.
+                                            type: string
+                                          values:
+                                            description: An array of string values.
+                                              If the operator is In or NotIn, the
+                                              values array must be non-empty. If the
+                                              operator is Exists or DoesNotExist,
+                                              the values array must be empty. If the
+                                              operator is Gt or Lt, the values array
+                                              must have a single element, which will
+                                              be interpreted as an integer. This array
+                                              is replaced during a strategic merge
+                                              patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                type: array
+                            required:
+                            - nodeSelectorTerms
+                            type: object
+                            x-kubernetes-map-type: atomic
+                        type: object
+                      podAffinity:
+                        description: Describes pod affinity scheduling rules (e.g.
+                          co-locate this pod in the same node, zone, etc. as some
+                          other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the affinity expressions specified
+                              by this field, but it may choose a node that violates
+                              one or more of the expressions. The node that is most
+                              preferred is the one with the greatest sum of weights,
+                              i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the affinity requirements specified by
+                              this field are not met at scheduling time, the pod will
+                              not be scheduled onto the node. If the affinity requirements
+                              specified by this field cease to be met at some point
+                              during pod execution (e.g. due to a pod label update),
+                              the system may or may not try to eventually evict the
+                              pod from its node. When there are multiple elements,
+                              the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                      podAntiAffinity:
+                        description: Describes pod anti-affinity scheduling rules
+                          (e.g. avoid putting this pod in the same node, zone, etc.
+                          as some other pod(s)).
+                        properties:
+                          preferredDuringSchedulingIgnoredDuringExecution:
+                            description: The scheduler will prefer to schedule pods
+                              to nodes that satisfy the anti-affinity expressions
+                              specified by this field, but it may choose a node that
+                              violates one or more of the expressions. The node that
+                              is most preferred is the one with the greatest sum of
+                              weights, i.e. for each node that meets all of the scheduling
+                              requirements (resource request, requiredDuringScheduling
+                              anti-affinity expressions, etc.), compute a sum by iterating
+                              through the elements of this field and adding "weight"
+                              to the sum if the node has pods which matches the corresponding
+                              podAffinityTerm; the node(s) with the highest sum are
+                              the most preferred.
+                            items:
+                              description: The weights of all of the matched WeightedPodAffinityTerm
+                                fields are added per-node to find the most preferred
+                                node(s)
+                              properties:
+                                podAffinityTerm:
+                                  description: Required. A pod affinity term, associated
+                                    with the corresponding weight.
+                                  properties:
+                                    labelSelector:
+                                      description: A label query over a set of resources,
+                                        in this case pods.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaceSelector:
+                                      description: A label query over the set of namespaces
+                                        that the term applies to. The term is applied
+                                        to the union of the namespaces selected by
+                                        this field and the ones listed in the namespaces
+                                        field. null selector and null or empty namespaces
+                                        list means "this pod's namespace". An empty
+                                        selector ({}) matches all namespaces.
+                                      properties:
+                                        matchExpressions:
+                                          description: matchExpressions is a list
+                                            of label selector requirements. The requirements
+                                            are ANDed.
+                                          items:
+                                            description: A label selector requirement
+                                              is a selector that contains values,
+                                              a key, and an operator that relates
+                                              the key and values.
+                                            properties:
+                                              key:
+                                                description: key is the label key
+                                                  that the selector applies to.
+                                                type: string
+                                              operator:
+                                                description: operator represents a
+                                                  key's relationship to a set of values.
+                                                  Valid operators are In, NotIn, Exists
+                                                  and DoesNotExist.
+                                                type: string
+                                              values:
+                                                description: values is an array of
+                                                  string values. If the operator is
+                                                  In or NotIn, the values array must
+                                                  be non-empty. If the operator is
+                                                  Exists or DoesNotExist, the values
+                                                  array must be empty. This array
+                                                  is replaced during a strategic merge
+                                                  patch.
+                                                items:
+                                                  type: string
+                                                type: array
+                                            required:
+                                            - key
+                                            - operator
+                                            type: object
+                                          type: array
+                                        matchLabels:
+                                          additionalProperties:
+                                            type: string
+                                          description: matchLabels is a map of {key,value}
+                                            pairs. A single {key,value} in the matchLabels
+                                            map is equivalent to an element of matchExpressions,
+                                            whose key field is "key", the operator
+                                            is "In", and the values array contains
+                                            only "value". The requirements are ANDed.
+                                          type: object
+                                      type: object
+                                      x-kubernetes-map-type: atomic
+                                    namespaces:
+                                      description: namespaces specifies a static list
+                                        of namespace names that the term applies to.
+                                        The term is applied to the union of the namespaces
+                                        listed in this field and the ones selected
+                                        by namespaceSelector. null or empty namespaces
+                                        list and null namespaceSelector means "this
+                                        pod's namespace".
+                                      items:
+                                        type: string
+                                      type: array
+                                    topologyKey:
+                                      description: This pod should be co-located (affinity)
+                                        or not co-located (anti-affinity) with the
+                                        pods matching the labelSelector in the specified
+                                        namespaces, where co-located is defined as
+                                        running on a node whose value of the label
+                                        with key topologyKey matches that of any node
+                                        on which any of the selected pods is running.
+                                        Empty topologyKey is not allowed.
+                                      type: string
+                                  required:
+                                  - topologyKey
+                                  type: object
+                                weight:
+                                  description: weight associated with matching the
+                                    corresponding podAffinityTerm, in the range 1-100.
+                                  format: int32
+                                  type: integer
+                              required:
+                              - podAffinityTerm
+                              - weight
+                              type: object
+                            type: array
+                          requiredDuringSchedulingIgnoredDuringExecution:
+                            description: If the anti-affinity requirements specified
+                              by this field are not met at scheduling time, the pod
+                              will not be scheduled onto the node. If the anti-affinity
+                              requirements specified by this field cease to be met
+                              at some point during pod execution (e.g. due to a pod
+                              label update), the system may or may not try to eventually
+                              evict the pod from its node. When there are multiple
+                              elements, the lists of nodes corresponding to each podAffinityTerm
+                              are intersected, i.e. all terms must be satisfied.
+                            items:
+                              description: Defines a set of pods (namely those matching
+                                the labelSelector relative to the given namespace(s))
+                                that this pod should be co-located (affinity) or not
+                                co-located (anti-affinity) with, where co-located
+                                is defined as running on a node whose value of the
+                                label with key <topologyKey> matches that of any node
+                                on which a pod of the set of pods is running
+                              properties:
+                                labelSelector:
+                                  description: A label query over a set of resources,
+                                    in this case pods.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaceSelector:
+                                  description: A label query over the set of namespaces
+                                    that the term applies to. The term is applied
+                                    to the union of the namespaces selected by this
+                                    field and the ones listed in the namespaces field.
+                                    null selector and null or empty namespaces list
+                                    means "this pod's namespace". An empty selector
+                                    ({}) matches all namespaces.
+                                  properties:
+                                    matchExpressions:
+                                      description: matchExpressions is a list of label
+                                        selector requirements. The requirements are
+                                        ANDed.
+                                      items:
+                                        description: A label selector requirement
+                                          is a selector that contains values, a key,
+                                          and an operator that relates the key and
+                                          values.
+                                        properties:
+                                          key:
+                                            description: key is the label key that
+                                              the selector applies to.
+                                            type: string
+                                          operator:
+                                            description: operator represents a key's
+                                              relationship to a set of values. Valid
+                                              operators are In, NotIn, Exists and
+                                              DoesNotExist.
+                                            type: string
+                                          values:
+                                            description: values is an array of string
+                                              values. If the operator is In or NotIn,
+                                              the values array must be non-empty.
+                                              If the operator is Exists or DoesNotExist,
+                                              the values array must be empty. This
+                                              array is replaced during a strategic
+                                              merge patch.
+                                            items:
+                                              type: string
+                                            type: array
+                                        required:
+                                        - key
+                                        - operator
+                                        type: object
+                                      type: array
+                                    matchLabels:
+                                      additionalProperties:
+                                        type: string
+                                      description: matchLabels is a map of {key,value}
+                                        pairs. A single {key,value} in the matchLabels
+                                        map is equivalent to an element of matchExpressions,
+                                        whose key field is "key", the operator is
+                                        "In", and the values array contains only "value".
+                                        The requirements are ANDed.
+                                      type: object
+                                  type: object
+                                  x-kubernetes-map-type: atomic
+                                namespaces:
+                                  description: namespaces specifies a static list
+                                    of namespace names that the term applies to. The
+                                    term is applied to the union of the namespaces
+                                    listed in this field and the ones selected by
+                                    namespaceSelector. null or empty namespaces list
+                                    and null namespaceSelector means "this pod's namespace".
+                                  items:
+                                    type: string
+                                  type: array
+                                topologyKey:
+                                  description: This pod should be co-located (affinity)
+                                    or not co-located (anti-affinity) with the pods
+                                    matching the labelSelector in the specified namespaces,
+                                    where co-located is defined as running on a node
+                                    whose value of the label with key topologyKey
+                                    matches that of any node on which any of the selected
+                                    pods is running. Empty topologyKey is not allowed.
+                                  type: string
+                              required:
+                              - topologyKey
+                              type: object
+                            type: array
+                        type: object
+                    type: object
+                  imagePullPolicy:
+                    description: PullPolicy describes a policy for if/when to pull
+                      a container image
+                    type: string
+                  repository:
+                    type: string
+                  tag:
+                    type: string
+                  tolerations:
+                    items:
+                      description: The pod this Toleration is attached to tolerates
+                        any taint that matches the triple <key,value,effect> using
+                        the matching operator <operator>.
+                      properties:
+                        effect:
+                          description: Effect indicates the taint effect to match.
+                            Empty means match all taint effects. When specified, allowed
+                            values are NoSchedule, PreferNoSchedule and NoExecute.
+                          type: string
+                        key:
+                          description: Key is the taint key that the toleration applies
+                            to. Empty means match all taint keys. If the key is empty,
+                            operator must be Exists; this combination means to match
+                            all values and all keys.
+                          type: string
+                        operator:
+                          description: Operator represents a key's relationship to
+                            the value. Valid operators are Exists and Equal. Defaults
+                            to Equal. Exists is equivalent to wildcard for value,
+                            so that a pod can tolerate all taints of a particular
+                            category.
+                          type: string
+                        tolerationSeconds:
+                          description: TolerationSeconds represents the period of
+                            time the toleration (which must be of effect NoExecute,
+                            otherwise this field is ignored) tolerates the taint.
+                            By default, it is not set, which means tolerate the taint
+                            forever (do not evict). Zero and negative values will
+                            be treated as 0 (evict immediately) by the system.
+                          format: int64
+                          type: integer
+                        value:
+                          description: Value is the taint value the toleration matches
+                            to. If the operator is Exists, the value should be empty,
+                            otherwise just a regular string.
+                          type: string
+                      type: object
+                    type: array
+                required:
+                - repository
+                - tag
+                type: object
+              sidecars:
+                items:
+                  properties:
+                    imagePullPolicy:
+                      description: The pullPolicy of the csi sidecar image
+                      type: string
+                    name:
+                      description: The name of the csi sidecar image
+                      type: string
+                    repository:
+                      description: The repository of the csi sidecar image
+                      type: string
+                    tag:
+                      description: The tag of the csi sidecar image
+                      type: string
+                  required:
+                  - name
+                  - repository
+                  - tag
+                  type: object
+                type: array
+            required:
+            - controller
+            - node
+            type: object
+          status:
+            description: IBMBlockCSIStatus defines the observed state of IBMBlockCSI
+            properties:
+              controllerReady:
+                type: boolean
+              nodeReady:
+                type: boolean
+              phase:
+                description: Phase is the driver running phase
+                type: string
+              version:
+                description: Version is the current driver version
+                type: string
+            required:
+            - controllerReady
+            - nodeReady
+            - phase
+            - version
+            type: object
+        type: object
+    served: true
+    storage: true
+    subresources:
+      status: {}
+---
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+    release: v1.11.3
+  name: ibm-block-csi-operator
+  namespace: kube-system
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRole
+metadata:
+  creationTimestamp: null
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+  name: ibm-block-csi-operator
+rules:
+- apiGroups:
+  - ""
+  resources:
+  - configmaps
+  verbs:
+  - create
+  - delete
+  - get
+- apiGroups:
+  - ""
+  resources:
+  - events
+  verbs:
+  - '*'
+- apiGroups:
+  - ""
+  resources:
+  - nodes
+  verbs:
+  - get
+  - list
+  - watch
+  - update
+  - patch
+- apiGroups:
+  - ""
+  resources:
+  - persistentvolumeclaims
+  verbs:
+  - get
+  - list
+  - update
+  - watch
+  - patch
+- apiGroups:
+  - ""
+  resources:
+  - persistentvolumeclaims/status
+  verbs:
+  - get
+  - update
+  - patch
+- apiGroups:
+  - ""
+  resources:
+  - persistentvolumeclaims/finalizers
+  verbs:
+  - update
+- apiGroups:
+  - ""
+  resources:
+  - persistentvolumes
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - patch
+  - update
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - pods
+  verbs:
+  - delete
+  - get
+  - list
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - secrets
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - ""
+  resources:
+  - serviceaccounts
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - watch
+- apiGroups:
+  - apiextensions.k8s.io
+  resources:
+  - customresourcedefinitions
+  verbs:
+  - create
+  - delete
+  - list
+  - watch
+- apiGroups:
+  - apps
+  resources:
+  - daemonsets
+  - deployments
+  - statefulsets
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - update
+  - watch
+- apiGroups:
+  - apps
+  resourceNames:
+  - ibm-block-csi-operator
+  resources:
+  - deployments/finalizers
+  verbs:
+  - update
+- apiGroups:
+  - csi.ibm.com
+  resources:
+  - '*'
+  verbs:
+  - '*'
+- apiGroups:
+  - monitoring.coreos.com
+  resources:
+  - servicemonitors
+  verbs:
+  - create
+  - get
+- apiGroups:
+  - rbac.authorization.k8s.io
+  resources:
+  - clusterrolebindings
+  - clusterroles
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - update
+  - watch
+- apiGroups:
+  - replication.storage.openshift.io
+  resources:
+  - volumereplicationclasses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - replication.storage.openshift.io
+  resources:
+  - volumereplications
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - patch
+  - update
+  - watch
+- apiGroups:
+  - replication.storage.openshift.io
+  resources:
+  - volumereplications/finalizers
+  verbs:
+  - update
+- apiGroups:
+  - replication.storage.openshift.io
+  resources:
+  - volumereplications/status
+  verbs:
+  - get
+  - patch
+  - update
+- apiGroups:
+  - security.openshift.io
+  resourceNames:
+  - anyuid
+  - privileged
+  resources:
+  - securitycontextconstraints
+  verbs:
+  - use
+- apiGroups:
+  - snapshot.storage.k8s.io
+  resources:
+  - volumesnapshotclasses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - snapshot.storage.k8s.io
+  resources:
+  - volumesnapshotcontents
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - update
+  - watch
+  - patch
+- apiGroups:
+  - snapshot.storage.k8s.io
+  resources:
+  - volumesnapshotcontents/status
+  verbs:
+  - update
+  - patch
+- apiGroups:
+  - snapshot.storage.k8s.io
+  resources:
+  - volumesnapshots
+  verbs:
+  - get
+  - list
+  - update
+  - watch
+- apiGroups:
+  - storage.k8s.io
+  resources:
+  - csidrivers
+  verbs:
+  - create
+  - delete
+  - get
+  - list
+  - watch
+- apiGroups:
+  - storage.k8s.io
+  resources:
+  - csinodes
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - storage.k8s.io
+  resources:
+  - storageclasses
+  verbs:
+  - get
+  - list
+  - watch
+- apiGroups:
+  - storage.k8s.io
+  resources:
+  - volumeattachments
+  verbs:
+  - get
+  - list
+  - patch
+  - update
+  - watch
+- apiGroups:
+  - storage.k8s.io
+  resources:
+  - volumeattachments/status
+  verbs:
+  - patch
+---
+apiVersion: rbac.authorization.k8s.io/v1
+kind: ClusterRoleBinding
+metadata:
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+  name: ibm-block-csi-operator
+roleRef:
+  apiGroup: rbac.authorization.k8s.io
+  kind: ClusterRole
+  name: ibm-block-csi-operator
+subjects:
+- kind: ServiceAccount
+  name: ibm-block-csi-operator
+  namespace: kube-system
+---
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  labels:
+    app.kubernetes.io/instance: ibm-block-csi-operator
+    app.kubernetes.io/managed-by: ibm-block-csi-operator
+    app.kubernetes.io/name: ibm-block-csi-operator
+    csi: ibm
+    product: ibm-block-csi-driver
+  name: ibm-block-csi-operator
+  namespace: kube-system
+spec:
+  replicas: 1
+  selector:
+    matchLabels:
+      app.kubernetes.io/name: ibm-block-csi-operator
+  template:
+    metadata:
+      annotations:
+        productID: 5027566ef6c54de49028be7df25119e1
+        productMetric: FREE
+        productName: IBM Block CSI Driver
+        productVersion: 1.11.3
+      labels:
+        app.kubernetes.io/instance: ibm-block-csi-operator
+        app.kubernetes.io/managed-by: ibm-block-csi-operator
+        app.kubernetes.io/name: ibm-block-csi-operator
+        csi: ibm
+        product: ibm-block-csi-driver
+    spec:
+      affinity:
+        nodeAffinity:
+          requiredDuringSchedulingIgnoredDuringExecution:
+            nodeSelectorTerms:
+            - matchExpressions:
+              - key: kubernetes.io/arch
+                operator: In
+                values:
+                - amd64
+                - s390x
+                - ppc64le
+      containers:
+      - args:
+        - --zap-encoder
+        - console
+        command:
+        - ibm-block-csi-operator
+        env:
+        - name: WATCH_NAMESPACE
+          value: ""
+        - name: POD_NAME
+          valueFrom:
+            fieldRef:
+              fieldPath: metadata.name
+        - name: OPERATOR_NAME
+          value: ibm-block-csi-operator
+        image: {{ atmosphere_images['ibm_block_csi_operator'] }}
+        imagePullPolicy: IfNotPresent
+        livenessProbe:
+          exec:
+            command:
+            - ./health_check.sh
+          initialDelaySeconds: 10
+          periodSeconds: 30
+        name: ibm-block-csi-operator
+        readinessProbe:
+          exec:
+            command:
+            - ./health_check.sh
+          initialDelaySeconds: 3
+          periodSeconds: 1
+        resources:
+          limits:
+            cpu: 100m
+            memory: 500Mi
+          requests:
+            cpu: 50m
+            memory: 100Mi
+        securityContext:
+          capabilities:
+            drop:
+            - ALL
+      serviceAccountName: ibm-block-csi-operator