***********************************************************************
 Welcome to Grafana Loki
 Chart version: {{ .Chart.Version }}
 Chart Name: {{ .Chart.Name }}
 Loki version: {{ .Chart.AppVersion }}
***********************************************************************

** Please be patient while the chart is being deployed **

Tip:

  Watch the deployment status using the command: kubectl get pods -w --namespace {{ $.Release.Namespace }}

If pods are taking too long to schedule make sure pod affinity can be fulfilled in the current cluster.

***********************************************************************
Installed components:
***********************************************************************

{{- if .Values.monitoring.selfMonitoring.enabled }}
* grafana-agent-operator
{{- end }}
{{- if eq (include "loki.deployment.isSingleBinary" .) "true" }}
* loki
{{- else -}}
{{- if .Values.gateway.enabled }}
* gateway
{{- end }}
{{- if .Values.minio.enabled }}
* minio
{{- end }}
{{- if eq (include "loki.deployment.isScalable" .) "true" }}
* read
* write
{{- if not .Values.read.legacyReadTarget }}
* backend
{{- end }}
{{- else }}
* compactor
* index gateway
* query scheduler
* ruler
* distributor
* ingester
* querier
* query frontend
{{- end }}
{{- end }}


{{- if eq (include "loki.deployment.isSingleBinary" .) "true" }}

Loki has been deployed as a single binary.
This means a single pod is handling reads and writes. You can scale that pod vertically by adding more CPU and memory resources.

{{- end }}


***********************************************************************
Sending logs to Loki
***********************************************************************

{{- if .Values.gateway.enabled }}

Loki has been configured with a gateway (nginx) to support reads and writes from a single component.

{{- end }}

You can send logs from inside the cluster using the cluster DNS:

{{- if .Values.gateway.enabled }}

http://{{ include "loki.gatewayFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local/loki/api/v1/push

{{- else }}
{{- if eq (include "loki.deployment.isSingleBinary" .) "true" }}

http://{{ include "loki.singleBinaryFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:{{ .Values.loki.server.http_listen_port }}/loki/api/v1/push

{{- end}}
{{- if eq (include "loki.deployment.isScalable" .) "true" }}

http://{{ include "loki.writeFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:{{ .Values.loki.server.http_listen_port }}/loki/api/v1/push

{{- end }}
{{- if eq (include "loki.deployment.isDistributed" .) "true" }}

http://{{ include "loki.distributorFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:3100/loki/api/v1/push

{{- end }}
{{- end }}

You can test to send data from outside the cluster by port-forwarding the gateway to your local machine:
{{- if .Values.gateway.enabled }}

  kubectl port-forward --namespace {{ $.Release.Namespace }} svc/{{ include "loki.gatewayFullname" . }} 3100:{{ .Values.gateway.service.port }} &

{{- else }}
{{- if eq (include "loki.deployment.isSingleBinary" .) "true" }}

  kubectl port-forward --namespace {{ $.Release.Namespace }} svc/{{ include "loki.singleBinaryFullname" . }} 3100:{{ .Values.loki.server.http_listen_port }} &

{{- end}}
{{- if eq (include "loki.deployment.isScalable" .) "true" }}

  kubectl port-forward --namespace {{ $.Release.Namespace }} svc/{{ include "loki.writeFullname" . }} 3100:{{ .Values.loki.server.http_listen_port }} &

{{- end }}
{{- if eq (include "loki.deployment.isDistributed" .) "true" }}

  kubectl port-forward --namespace {{ $.Release.Namespace }} svc/{{ include "loki.distributorFullname" . }} 3100:3100 &

{{- end }}
{{- end }}

And then using http://127.0.0.1:3100/loki/api/v1/push URL as shown below:

```
curl -H "Content-Type: application/json" -XPOST -s "http://127.0.0.1:3100/loki/api/v1/push"  \
--data-raw "{\"streams\": [{\"stream\": {\"job\": \"test\"}, \"values\": [[\"$(date +%s)000000000\", \"fizzbuzz\"]]}]}"
{{- if .Values.loki.auth_enabled }} \
-H X-Scope-OrgId:foo
{{- end}}
```

Then verify that Loki did received the data using the following command:

```
curl "http://127.0.0.1:3100/loki/api/v1/query_range" --data-urlencode 'query={job="test"}' {{- if .Values.loki.auth_enabled }} -H X-Scope-OrgId:foo {{- end}} | jq .data.result
```

***********************************************************************
Connecting Grafana to Loki
***********************************************************************

If Grafana operates within the cluster, you'll set up a new Loki datasource by utilizing the following URL:

{{- if .Values.gateway.enabled }}

http://{{ include "loki.gatewayFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local/

{{- else }}
{{- if eq (include "loki.deployment.isSingleBinary" .) "true" }}

http://{{ include "loki.singleBinaryFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:{{ .Values.loki.server.http_listen_port }}/

{{- end}}
{{- if eq (include "loki.deployment.isScalable" .) "true" }}

http://{{ include "loki.readFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:{{ .Values.loki.server.http_listen_port }}/

{{- end }}
{{- if eq (include "loki.deployment.isDistributed" .) "true" }}

http://{{ include "loki.queryFrontendFullname" . }}.{{ $.Release.Namespace }}.svc.cluster.local:3100/

{{- end }}
{{- end }}


{{- if .Values.loki.auth_enabled }}

***********************************************************************
Multi-tenancy
***********************************************************************

Loki is configured with auth enabled (multi-tenancy) and expects tenant headers (`X-Scope-OrgID`) to be set for all API calls.

You must configure Grafana's Loki datasource using the `HTTP Headers` section with the `X-Scope-OrgID` to target a specific tenant.
For each tenant, you can create a different datasource.

The agent of your choice must also be configured to propagate this header.
For example, when using Promtail you can use the `tenant` stage. https://grafana.com/docs/loki/latest/send-data/promtail/stages/tenant/

When not provided with the `X-Scope-OrgID` while auth is enabled, Loki will reject reads and writes with a 404 status code `no org id`.

You can also use a reverse proxy, to automatically add the `X-Scope-OrgID` header as suggested by https://grafana.com/docs/loki/latest/operations/authentication/

For more information, read our documentation about multi-tenancy: https://grafana.com/docs/loki/latest/operations/multi-tenancy/

> When using curl you can pass `X-Scope-OrgId` header using `-H X-Scope-OrgId:foo` option, where foo can be replaced with the tenant of your choice.

{{- end }}